Anti Slip Tape (69020) “Sure-Step” Series “Sure-Step” abrasive, non-skid safety tapes provide a high traction, anti-slip, waterproof surface to help prevent slips and falls. The PVC backing is impregnated with silicone carbide (black) or aluminum oxide (colors) and coated on one side with an aggressive acrylic adhesive. Bonds to a variety of materials and conforms to irregular surfaces. Tape is wound on a 3” neutral core or available in pre-slit strips/cleats. APPLICATIONS / FEATURES:
Applied both indoors and outdoors to prevent slipping in walkways, ramps, and stairways. Used in machine shops, work areas, industrial equipment, etc. Vibrant colors and hazard stripes are highly visible and used to increase hazard awareness. Complies with OSHA 1910.263(3).
PHYSICAL PROPERTIES:
Grit Size / Type
60 Grit Silicone Carbide (Black) 60 Grit Aluminum Oxide (Colors)
Backing
PVC Sheet
Adhesive
Solvent Based Acrylic
Tape Thickness
32 mils (0.8 mm)
Liner
White Siliconized Paper
Adhesion to Steel
≥ 53.8 oz/inch
Tensile Strength
≥ 13.4 lbs/inch
Elongation
≥ 25%
Application Temperature
23°F to 122°F
Specifications
Meets ASTM G154, ASTM D2616
Available Colors (13)
Black, Translucent (Clear), Gray, White, Red, Orange, Yellow, Dark Green, Dark Blue, Fluorescent Red, Fluorescent Orange, Fluorescent Yellow, and Black/Yellow Striped
SURFACE PREPARATION:
The surface area must be clean, dry, and free of dust, grease, and oil before applying the tape. Cleaning the area with alcohol is recommended. NOTE: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods.
Phone:
877-284-4781
Email:
hello@tapejungle.com
