QU10306 Countershaft 5th Retaining Ring for NV4500 transmissions. 1st Design 1992 to early 1995. Two snap rings stacked together can be used to replace the out of production QU10312 in 1995-2007 NV4500 transmissions. Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project! Dan the Gear Man® Tech Notes: 1995-2007 NV4500
NV4500 Tools Applications
Tech Note 1: 1995-2007 NV4500The original QU10312 0.100" Thick 1994.5-2007 Countershaft 5th Gear Clutch Snap Ring is no longer available. Use (2) QU10306 0.050" 1992-1994.5 Snap Rings stacked together. The overall thickness and strength remains the same and the QU10306 Snap Rings are less prone to stretching during installation. Tech Note 2: NV4500 ToolsNeed Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual. You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS
Component 23 SplineDodge 4x4NV4500LD 29 SplineDodge 4x4NV4500HD 30 SplineDodge 4x2NV4500LD 31 SplineDodge 4x2NV4500HD 32 SplineGM 4x4 35 SplineGM 4x2
Mainshaft Nut QT2002 QT2001QT2036 QT2002 QT2001QT2036 QT2002QT2028 1-1/2" HexSocket
Mainshaft Holding NLA QT2000 NLA QT2011 N/A N/A
5th Gear NutTorx® Cross Bolt N/A QT9205 N/A QT9205 N/A N/A
Output Seal Installer N/A QT1801 N/A QT2058CALL Not Used Not Used
Tailshaft Bushing Remover and Installer Not Used Not Used Not Used QT2044 Not Used Not Used
TOOLS For ALL NV4500 MODELS
CountershaftFront Bearing Cup Installer QT1802 Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal
Countershaft Front Bearing Installer QT2004 Can also use to press 3-4 Synchro Hub on original equipment mainshafts
Input Bearing & Countershaft Rear Bearing Installer QT2005 Can also use to install Input Seal
Input Bearing Cup Installer QT1801 Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
Countershaft Support QT2006 Use to support front of countersahft when installing countershaft rear bearing
1-2 Synchronizer Support QT2008 Use to support 1-2 synchronizer hub during synchronizer assembly
10mm 1/2" Drive 12 Point Socket QT1020 USA Made Impact Socket for Factory Tailshaft Housing Bolts
Long Shank Punch for Shift Lug QT9300 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin
ApplicationsNew Venture NV4500 Transmissions: 1992, 1993, 1994, early 1995Can Use (2) Snap Rings to replace the No Longer Available QU10312 for 1995.5-2007 NV4500 Transmissions
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
