QU10816 0.090" Thick Shaft Snap Ring for New Process Transfer Cases and Manual Transmissions 0.090" (+/- 0.0015") is used for both transfer case and manual transmission applications. QU10816 is a genuine New Process/New Venture snap ring. For 1989-2010 New Process and New Venture chain drive transfer cases such as the NP241 and NP246, QU10816 is used as the rear output ball bearing to rear output shaft snap ring. For 1969-1993 NP205 transfer cases, QU10816 is one of 4 selective fit input shaft Snap Ring used to secure small bore input ball bearings to Chevy/GMC 10 or 27 spline and Dodge 23 spline NP205 Transfer Case input shafts. To minimize input shaft end-play, the thickest Snap ring that will naturally fit in the input shaft snap ring groove and against the installed input bearing is desired. New Process offered four Snap Ring widths (QU10826) 0.087", (QU10816) 0.090", (QU10828) 0.093", (QU10829) 0.096" for the small input versions of the NP205. QU10816 Snap Ring ALSO fits 1980-1991 GM Slip Yoke Type Rear Output Shafts. For New Process manual transmissions QU10816 fits NP435, NP535, and NV2500 Manual Transmissions. USA Made.
Also See: QK2069 Transfer Case Saver Kit
Need More Info? Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: Thickness Tolerance
Transfer Case Saver Before NP205 Assembly Matching Parts for NP205 Transfer Cases Matching Parts for 1994-1996.5 Dodge NP241DHD Matching Parts for 1994-2002 Dodge NP241DLD Matching Parts-Saved for Future Use Matching Parts-Saved for Future Use Matching Parts-Saved for Future Use Applications
Tech Note 1: Thickness ToleranceThickness tolerance is +/-0.0015".
Tech Note 2: Transfer Case SaverNew Process NP241 series transfer cases with slip yoke rear output shafts have had occasional problems with the rear output shaft bearing to rear output shaft snap ring being forced out of the shaft groove especially in vehicles with high-torque diesel engines. While relatively rare, when this problem happens significant transfer case damage occurs. A permanent solution is to replace the snap ring with one of our QK2069 Transfer Case Saver Kits.
Tech Note 3: Before NP205 AssemblyIn most cases, the input ball bearing can be pushed into place on a NP205 input shaft. Before assembling the input shaft into the transfer case, temporarily install the bearing on the shaft and measure the exposed groove thickness.
Tech Note 4: Matching Parts for NP205 Transfer CasesExploded View XV4005 1980-1993 Dodge NP205 Transfer CaseQU10826 0.087" Snap RingQU10828 0.093" Snap RingQU10829 0.096" Snap Ring
Tech Note 5: Matching Parts for 1994-1996.5 Dodge NP241DHDExploded View XV4000 1994-1996.5 Dodge Ram NP241DHD Transfer CaseQU10872 Synchro Hub to Mainshaft Snap RingQU10820 Synchro Strut Tension SpringQU11166 Synchro HubQU10821 Synchro StrutQU50354 Synchro SleeveQU10819 Synchro RingQU50000 Drive ChainQU50177 Oil Pump SealQU50423 Oil PumpQU50875 Rear Output BearingQK2069 Transfer Case Saver Kit
Tech Note 6: Matching Parts for 1994-2002 Dodge NP241DLDExploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer CaseExploded View XV4004 1998-2002 Dodge Ram NP241DLD Transfer CaseQU10872 Synchro Hub to Mainshaft Snap RingQU10820 Synchro Strut Tension SpringQU11166 Synchro HubQU10821 Synchro StrutQU50354 Synchro SleeveQU10819 Synchro RingQU50071 Drive ChainQU50355 Upper Chain Drive SprocketQU50603 Rear Output Mainshaft, 1998-2002QU50177 Oil Pump SealQU50423 Oil PumpQU50875 Rear Output BearingQK2069 Transfer Case Saver KitQU40813 Rear Output Slip Yoke, 1998-2002Mopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 2.31 Quarts to Fill
Tech Note 7: Matching PartsSaved for Future Use
Tech Note 8: Matching PartsSaved for Future Use
Tech Note 9: Matching PartsSaved for Future Use
Applications(Incomplete List)
Chevy/GMC:New Process NP205 Transfer CaseNew Process NP241C Transfer CaseNew Process NP243C Transfer CaseNew Process NP246C Transfer CaseSlip Yoke Type Rear Output Shafts: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991
Dodge:New Process NP205 Transfer CaseNew Process NP241DHD Transfer Case: 1994, 1995, 1996.5New Process NP241DLD Transfer Case: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
