QU10817 Rear Output Shaft Snap to Rear Output Bearing Snap Ring Two of these Snap Rings are used to center QU50207 Rear Output Bearing to the Mainshaft for most New Process NP241DHD Transfer Cases. Two more (for a total of 4) are used to secure the speedometer drive gear on 1996 and 1997 model year units. This Ring fits ALL 1998 to 2002 NP241DHD models and those 1996 and 1997 NP241DHD transfer cases with the 31 Spline Rear Output Shafts and 2.200" diameter rear slip yokes. NP241DHD transfer cases were optional on the Ram 2500 and standard on the Ram 3500. USA Made.
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: When Ordering
Matching Parts for 1996.5-1997 NP241DHD Matching Parts for 1998-2002 NP241DHD Applications
Tech Note 1: When Ordering Ordering parts for 1996 and 1997 NP241DHD transfer cases can be confusing because there were 2 versions being used by Dodge for those years. Most 1996 transfer cases will have a two piece tailshaft housing, have a 32 spline output shaft, and use a driveshaft slip yoke with an outside diameter of approximately 1-13/16". As far as I have seen, these small output cases all have 8 digit assembly numbers that begin with 5209. You will also find a few 1996 trucks and most 1997 ones that have a NP241DHD using a large bore, one piece tailshaft housing. The output shaft has 31 splines, slip yoke diameter is just a bit over 2-3/16" and all the 8 digit assembly numbers I have seen start with 5210.
Tech Note 2: Matching Parts for 1996.5-1997 NP241DHDExploded View XV4001 1996.5-1997 Dodge Ram NP241DHD Transfer CaseQU10872 Synchro Hub to Mainshaft Snap RingQU10820 Synchro Strut Tension SpringQU11166 Synchro HubQU10821 Synchro StrutQU50354 Synchro SleeveQU10819 Synchro RingQU50000 Drive ChainQU10921 Upper Chain Drive SprocketQU50177 Oil Pump SealQU10936 Oil PumpQU50207 Rear Output BearingQU10815 Rear Output Bearing to Case Snap Ring
Tech Note 3: Matching Parts for 1998-2002 NP241DHDExploded View XV4003 1998-2002 Dodge Ram NP241DHD Transfer CaseQU10872 Synchro Hub to Mainshaft Snap RingQU10820 Synchro Strut Tension SpringQU11166 Synchro HubQU10821 Synchro StrutQU50354 Synchro SleeveQU10819 Synchro RingQU50000 Drive ChainQU10921 Upper Chain Drive SprocketQU50523 Rear Output MainshaftQU50177 Oil Pump SealQU10936 Oil PumpQU50207 Rear Output BearingQU10815 Rear Output Bearing to Case Snap RingQU40354 Rear Output Slip YokeMopar® 68218057AB ATF+4 Transfer Case Fluid, Requires 3-1/4 Quarts to Fill
ApplicationsDodge Ram 2500 and Ram 3500 4x4:With large bore NP241DHD Transfer Cases (Use 4 QU10817 Rings): 1996.5, 1997Dodge NP241DHD Transfer Cases (Use 2 QU10817 Rings) All: 1998, 1999, 2000, 2001, 2002
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
