QU11092 90° Breather Vent for New Process/New Venture Transfer Cases and Transmissions including Chevy/GMC NV241C, Dodge NP231 series, NP241 series, NV271D, NV273D and Ford NV271F, NV273F Transfer Cases is a genuine original equipment press-in 90 degree Breather Vent Fitting for the front case half of all Dodge or Ford New Process/New Venture Dodge NP231D, NP231DLD, NP231DHD, NP241D, NP241DLD, NP241DHD, Dodge or Ford NV271 and NV273 series, some Chevy and GMC NV241C Transfer Cases, New Venture NV4500 5 speed manual transmissions and more. USA made.
Also see QU10104 Breather Vent Assembly
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: Lubricate
Fitting Matching Parts
New Venture, New Process, Magna 1994-2002 NP241DLD, NP241DHD NV4500 Specs and Rebuild Info Applications
Tech Note 1: LubricateApply a thin film of sealant such as S64000 Sleeve Locker to the stem before installing the vent into the case hole.
Tech Note 2: FittingQU11092 has a stub diameter of approximately 0.371". It is a press fit into approximate 0.365" diameter vent holes in most New Process and New Venture transmissions and transfer cases. The press fit is usually adequate to retain the vent fitting, but I like to put some S64000 Sleeve Retainer on the stub before pressing it into the housing. On some applications, you can also slightly expand the inboard end of the stub if it protrudes past the inside of the case. The barbed end of QU11092 is made to fit 5/16" inside diameter hose.
Tech Note 3: Matching PartsMatching Parts for QU11092 Vent Fitting are:QU30040 Capped Vent ValveQU10104 Breather Vent AssemblyQU10160 Vent BaffleQU10924 5/16" Breather HoseQU11014 Dodge NV271D Front Case HalfQU50657 Dodge NV273D Front Case HalfQU20187 Ford NV271F Front CaseQU20189U Used Ford NV273F Front CaseS64000 Sleeve LockerChevy & GMC Shop ManualsDodge & Ram Shop ManualsFord Shop Manuals
Tech Note 4: New Venture, New Process, MagnaWhen Ford (1999 models) and Dodge (2003 models) first used NV271 and NV273 transfer cases, New Process Gear (NPG) of East Syracuse N.Y. was part of New Venture Gear (NVG). When NVG dissolved, NPG continued on under Chrysler. Chrysler subsequently sold the production rights to Magna, a Canadian automotive parts company. All these name changes are confusing, but the important thing to know is a specific assembly number for any 271F, 271D, 273D, and 273F transfer case is the same and uses the same replacement parts regardless if it was built by New Venture, New Process, or Magna.
Tech Note 5: 1994-2002 NP241DLD, NP241DHDExploded View XV4000 1994-1996.5 Dodge Ram NP241DHD Transfer CaseExploded View XV4001 1996.5-1997 Dodge Ram NP241DHD Transfer CaseExploded View XV4003 1998-2002 Dodge Ram NP241DHD Transfer CaseExploded View XV4002 1994-1997 Dodge Ram NP241DLD Transfer CaseExploded View XV4004 1998-2002 Dodge Ram NP241DLD Transfer CaseQU50591 1994-1997 NP241DHD Front Case HalfQU11143 1998-2002 NP241DHD Front Case HalfQU11142 1998-2002 NP241DLD Front Case Half
Tech Note 6: NV4500 Specs and Rebuild InfoNeed Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual.
You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS
Component
23 SplineDodge 4x4NV4500LD
29 SplineDodge 4x4NV4500HD
30 SplineDodge 4x2NV4500LD
31 SplineDodge 4x2NV4500HD
32 SplineGM 4x4
35 SplineGM 4x2
Mainshaft Nut
QT2002
QT2001QT2036
QT2002
QT2001QT2036
QT2002QT2028
1-1/2" HexSocket
Mainshaft Holding
NLA
QT2000
NLA
QT2011
N/A
N/A
5th Gear NutTorx® Cross Bolt
N/A
QT9205
N/A
QT9205
N/A
N/A
Output Seal Installer
N/A
QT1801
N/A
QT2058CALL
Not Used
Not Used
Tailshaft Bushing Remover and Installer
Not Used
Not Used
Not Used
QT2044
Not Used
Not Used
TOOLS For ALL NV4500 MODELS
CountershaftFront Bearing Cup Installer
QT1802
Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal
Countershaft Front Bearing Installer
QT2004
Can also use to press 3-4 Synchro Hub on original equipment mainshafts
Input Bearing & Countershaft Rear Bearing Installer
QT2005
Can also use to install Input Seal
Input Bearing Cup Installer
QT1801
Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
Countershaft Support
QT2006
Use to support front of countersahft when installing countershaft rear bearing
1-2 Synchronizer Support
QT2008
Use to support 1-2 synchronizer hub during synchronizer assembly
10mm 1/2" Drive 12 Point Socket
QT1020
USA Made Impact Socket for Factory Tailshaft Housing Bolts
Long Shank Punch for Shift Lug
QT9300
3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin
Applications
Chevy and GMC:Fits most New Process and New Venture Aluminum Transfer Cases 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007C4500/C5500 Chevy Kodiak and GMC Top Kick 4x4 medium duty trucks NP273 Transfer Case: 2005, 2006, 2007, 2008, 2009
Dodge and Ram:Ram 2500, Ram 3500 with NP241DLD or NP241DHD Transfer Cases: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002Ram 2500, Ram 3500 NV271D and NV273D Transfer Cases: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012Ram 45500, Ram 5500 NV271D and NV273D Transfer Cases: 2008, 2009, 2010, 2011, 2012
Ford:F250, F350, F450, F550 NV271F, NV273F Transfer Cases: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010Excursion NV273F Transfer Case: 2000, 2001, 2002, 2003, 2004, 2005
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
