TKA20267 New Torque King® Dana 44 Closed Knuckle Front Spindle
is a brand new Front Spindle with pre-installed QU40025 Spindle Bushing for Chevy, Dodge, Ford, GMC, and International Dana 44 1/2 ton and 3/4 ton closed knuckle Dana 44 Standard front axles with internally splined wheel hubs. This part fits 1960-1969 Chevy/GMC 1/2 ton, 1969-1971 Dodge 1/2 ton, 1960-1965 Ford F-100 1/2 ton, 1964-1972 International 1/2 ton, plus 1960-1975 Ford F250 3/4 ton 4x4s with the standard 3300 pound capacity Dana 44 front axle. USA Made.
Also Available Limited to stock on hand: QU20267U Used Dana 44 Closed Knuckle Front Spindle
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: Limited Supply Verify Your Axle Pre-Lube No Gasket Matching Parts Applications
Tech Note 1: Limited SupplyFord offered both standard 3300 pound capacity and optional heavy duty 3500 pound capacity Dana 44 closed knuckle front axles for 1960-1975 F250 4x4s. Except for differential components, very few parts are interchangeable between the standard and heavy-duty Ford Dana 44 axles. There are two easy ways to visually identify which axle you have. TKA20267 fits the standard, 3300 lb. axle which has an internally splined front wheel hub that is about 3-1/2" in diameter at the outer end. This axle will also have an 8 bolt ball seal on the back side of the steering knuckle. The optional, 3500 lb. Dana 44HD axle has a 4-1/2" diameter wheel hub drilled and tapped for six 3/8" bolts used to attach an external mount lockout or drive flange. The HD axle has a 12 bolt ball seal on the backside of the knuckle.
Tech Note 2: Verify Your AxleTKA20267 was only used on standard capacity Dana 44 closed knuckle front axles with 3-1/2" outside diameter internally splined wheel hubs. Parts production for almost all parts specific to these axles ended decades ago. If you need a Spindle for your vintage 4x4, you better get it now as our supply on unique parts for these axles is very limited.
Tech Note 3: Pre-LubePre-lube the inside of the spindle bushing with some clean grease before installing the spindle to provide initial lubrication.
Tech Note 4: No GasketNo gasket or sealant was used by the factory to seal between the Spindle and Steering Knuckle. If you were experiencing some lubricant seepage between the two parts, it is acceptable to apply a thin film of RTV sealant to one of the cleaned Knuckle/Spindle mating surfaces before installing your new Spindle.
Tech Note 5: Matching PartsQK4727 Spindle Nut and Washer Kit includes QU40004 Inner Nut, QU40060 Washer, QU40031 Outer NutQU50448 Outer Wheel BearingQU50447 Outer Wheel Bearing Cup QU50577 Inner Wheel Bearing CupQU50578 Inner Wheel Bearing QU50654 Inner Wheel Seal Dodge, GM, IHC, 1960-1969.5 FordQU90001 Inner Wheel Seal 1969.5-1975 FordTK4711/TK4780 Premium Wheel Bearing and Seal Kits 1969.5-1975 Ford with Timken BearingsTK4911/TK4912 Premium Wheel Bearing and Seal Kits with Timken BearingsQU20271U Used 5 Bolt Front Hub for 1960.5-1965 Ford F100QU20382U Used 8 Bolt Front Hub for 1969.5-1975 Ford F250 S82194 Ultra Gray RTV SealantTKA20252 Spindle for 1960-1966 Ford Dana 44HDQU90018 Protection Extended Service Premium Synthetic Grease ES Synthetic Wheel Bearing GreaseQT5500 Wheel Bearing Packer QT1012i or QT1025 4 Lug Spindle Nut SocketsChevy & GMC Shop ManualsDodge & Ram Shop ManualsFord Shop Manuals
Applications:
Chevrolet/GMC:K5/K10/K15 Blazer, Jimmy, Suburban, 1/2 ton truck: 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969Dodge:W100 1/2 ton truck: 1969, 1970, 1971
Ford:F-100: 1960.5, 1961, 1962, 1963, 1964, 1965F-250 with standard 3300 pound capacity Model 44 Front Axle: 1960.5, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975
International:1/2 ton: 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
