TK20368 Torque King® Right Inner Axle Shaft for 1999-2005 Ford Dana 50 Front Axle is our 30 spline, 100% American made heavy-duty replacement chromemoly right inner axle shaft for all 2000-2005 Ford Excursion AND 1999-2002 Ford F250 and F350 4x4 single rear wheel trucks with Dana 50 front axles. This shaft measures about 37-1/8" from center of u-joint hole to the end and it replaces your wrecked passenger side (long side) inner axle shaft in your Excursion or Ford Super Duty 4x4 truck. USA Made.
NOTE: This Shaft has a maximum strength yoke design, so it can NOT be used with QU40243 Outboard Axle Tube Dust Seal
Also see QU40318 Outer Axle Shaft and TK40715 (factory lubed) or TK40724 (greaseable) cold-forged u-joints
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: 1999-2005
Spline Size Dimensions 4x4 Tech Publications Matching Parts Applications
Tech Note 1: 1999-2005The Dana 50 Monobeam front axle was only used in 1999-2005 Ford full size 4x4s. It was the stock axle in F350 Single Rear Wheel and F250 Super Duty 4x4s from 1999 to early 2002 when it was replaced by a heavier Dana 60 axle. The Dana 50 monobeam was the ONLY axle used in the 2000-2005 Excursion. I have been unable to verify the Dana 50 being used in the Super Duty after 2002, but it is possible it may have been put in fleet, export, light-duty, or foreign assembled trucks.
Tech Note 2: Spline SizeExternally, the Model 50 Axle looks almost exactly like the Dana 60, however, the Dana 50 axle shaft splines and internal differential components are substantially smaller. If you are unsure which axle you have, you can call us with the axle tag number or check your inner axle shaft splines. Dana 50 inner axle shafts are 1-5/16" x 30 spline. Dana 60 inner axle shafts are 1-1/2" x 35 spline.
Tech Note 3: DimensionsTK20368 is manufactured from a high-strength, chrome-moly, U.S. made forging. The splined inner end is approximately 1-5/16 in diameter and it has 30 splines. The yoke end is made for standard Ford/Spicer 1480 series axle u-joints with 1-3/8" diameter cups. The span between the inner yoke ears is 3". Length from center of u-joint hole to end of spline is approximately 37-1/8".
Tech Note 4: 4x4 Tech PublicationsAn awful lot of axle shafts and new axle shaft universal joints are wrecked by slam-bang methods of service. Do it right the first time. See my Technical Service Bulletin TSB4610 Super Duty Front Axle Shaft Service or my Super Duty® and Excursion Front Axle Service Manuals TM4688 or TM4637.
Tech Note 5: Matching PartsQU40244 Inner Axle Oil SealQK4643 and QK4808 Inner Axle Seal and Install Tool KitsQU20039 Dana OE Inner Axle Shaft GuideQU20239 "Spider Gear" Kit TK20369 Torque King® Dana 50 Left Inner Axle ShaftQA4920 Dana 50 Right Axle Shaft AssemblyTK40715 (factory lubed) or TK40724 (greaseable) cold-forged high-performance u-jointsQU40318 Outer Axle Shaft QU40143 Outer Axle Shaft Support BearingQU40242 Inner Thrust Washer for Outer Axle ShaftQU40385 Outer 3 Piece Thrust Washer SetQU40233 1999-2002 Unshielded Axle Shaft to Knuckle SealQU20035 2003-2005 Shielded Axle Shaft to Knuckle SealQU40155 Outer Axle Shaft Snap RingQK4637 Hub and Knuckle Seal Kit with UnShielded Seal (fits 1999-2005)QK4847 Hub and Knuckle Seal Kit with Shielded Seal (2002.5-2005)QK4610 Hub and Knuckle Seal Kit with UnShielded Seal and Knuckle Seal Installer (fits 1999-2005)QK4846 Hub and Knuckle Seal Kit with Shielded Seal and Knuckle Seal Installer (fits 2002.5-2005)QT1515 Knuckle Seal InstallerFord Shop Manuals
Applications:
Ford:F-250, F-350 Super Duty 4x4 with Dana 50 Front Axle: 1999, 2000, 2001, 2002Excursion 4x4: 2000, 2001, 2002, 2003, 2004, 2005
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
