QU40084 Large Driveshaft or Ford IFS Axle Shaft Boot Clamp is a one-ear, crimp type stainless steel clamp that is mainly used on mid 1980s and newer driveshafts to seal the large end of 4 or 5 Pleat Driveshaft Boot to the female spline Slip Yoke. QU40084 is also used on 1990-1997 Ford Dana 35IFS, 1983-1996 Ford Dana 44IFS and 1983-1997 Ford Dana 50 IFS Axle Shaft Slip Yokes. Made in Canada.
Interactive Exploded View XV1010DT 1995, 1996, 1997 Ford F250 Dana 50IFS Axle
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: Maintenance Clamp Tool Applications
Tech Note 1: MaintenanceA boot protected driveshaft slip joint will usually outlast the truck as long as the boot is intact and there is some grease on the splines. If your Boot is damaged, REPLACE IT! If your Boot is OK, but you are doing other driveshaft service, always clean and grease the splines AND replace the clamps!
Tech Note 2: Clamp ToolUsing a Clamp Tool specifically made to tighten eared clamps around the driveshaft boot is the best way to tension a stainless steel Boot Clamp to provide an air and watertight seal. QU40084 is used to seal the large end of popular driveshaft and axle shaft slip yoke boots. Special crimping pliers like our QT4018i is the preferred method of closing the clamp, but hoof nippers or some types of wire cutters can be used in an emergency, but the results are often unsatisfactory.
Applications:
Dodge:Ram 1500 4x4 Front Driveshaft: 2000, 2001Ram 2500, Ram 3500 4x4: 1999.5, 2000, 2001, 2002
Ford:Bronco II with Dana 35IFS Twin Traction Beam Front Axle: 1990Explorer with Dana 35IFS Twin Traction Beam Front Axle: 1990, 1991, 1992, 1993, 1994, 1991, 1992, 1993, 1994, 1991, 1992, 1993, 1994Ranger with Dana 35IFS Twin Traction Beam Front Axle: 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997Bronco, F-150, F-250 4x4 Trucks with Dana 44IFS Twin Traction Beam Front Axles: 1983.5, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997F-250 4x4s with Dana 50IFS Twin Traction Beam Front Axles that have the right inner axle shaft retained by a snap ring: 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997F-350 4x4s with Dana 50IFS Twin Traction Beam Front Axles that have the right inner axle shaft retained by a snap ring: 1983, 1984, 1985, 1985.5
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
