QU40159 Inner Axle Shaft Seal A genuine original equipment seal used in many Dana-Spicer Model 44 and Model 60 front drive axles from the 1970's to 2001. Manufactured for Dana by NOK, this seal meets all original design specifications for your standard or Central Axle Disconnect (CAD) axle. Due to the restricted area where these seals press into, it is recommended you use QT1029 Seal Installer and the appropriate Front Axle press tooling such as our QK4620 or TS4620 Sets for CAD axles or for a trouble and leak free installation. Imported. Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project! Dan the Gear Man® Tech Notes: Location
Old Seals Tech Help Installation Matching Parts Applications
Tech Note 1: LocationLike almost all solid beam axle shaft seals, QU40159 Seals are pressed in the inboard ends of the axle tubes next to the differential. It is impossible to replace the seals from the outside! You must remove the hubs, axle shafts, and differential to replace these seals. Tech Note 2: Old SealsOnce the axle is disassembled, the old seals can be easily removed with our TS1184 (Dodge CAD axles) or QK4647 (Non-CAD axles) Seal Remover Tool Sets or other suitable tool such as a length of sturdy pipe that will fit inside the axle tube. You will also need to clean the inside of the axle tube to remove dirt and crud that could get pushed into your new seal during reassembly. Tech Note 3: Tech HelpNeed tech help on how to perform inner axle seal replacement on your 1994-1999 Dodge Ram 2500 or Ram 3500? Get my TSB4620 Inner Axle Seal Replacement Tech Service Bulletin, a fully illustrated, 8 page publication with 31 color photos. Includes Step by Step Service Procedures, Tool Recommendations, and Torque Specifications for replacing those pesky front axle shaft seals on all 1994 to 1999 Dodge Ram 4x4 trucks with Dana-Spicer Model 60 front drive axles. Available in print version only. Tech Note 4: InstallationAfter the seals are installed, be sure to grease the lips to provide initial lubrication for the seal lip. Neglecting this step will usually cause the seal to fail the first time you use 4x4 mode. Do NOT grease the axle shafts as the grease will pick up crud as they are slid into the axle housing. Tech Note 5: Matching PartsMatching Parts for QU40160 Seal:QU40214 Dana 44 Diff Cover GasketS82194 Ultra Gray RTV Sealant QK4647 Inner Axle Seal Remover Tool SetQT1029 Adjustable Depth Seal InstallerTS4620, TS4631 Tool Sets, and QK4620, and QK4631 Tool and Seal Kits for 1989-2001 Dodge.QK4830 Tool and Seal Kit for 1970's-1988 Dana 44 AxlesTS4830 Tool only Set for 1970's-1988 Dana 44 AxlesQT1032 Diff Case SpreaderChevy & GMC Shop ManualsDodge & Ram Shop ManualsFord Shop ManualsJeep Shop Manuals Applications: Right Axle Shaft Applications for Dodge and Plymouth with CAD:Ramcharger, Trailduster, W150: 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 W250 (gasoline engine only): 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993 Left Axle Shaft Applications for Dodge with CAD:Dodge Ram 1500: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Dodge All Ram 2500 and Ram 3500 trucks: 1994, 1995, 1996, 1997, 1998, 1999Both Left & Right Applications on Non-Disconnect AxlesChevy/GMC:K20/25: 1970 K5, K10/15, K20/25 w/model 44 axle: 1978, 1979, 1980Dodge:Ramcharger W-150, W-250: 1977½, 1978, 1979, 1980, 1981, 1982, 1983, 1984 Ford:F-150 Super Cab with Axle Tag Number 610048 and 610068: 1978, 1979 F-250 (Model 44 Axle only): 1978, 1979 Jeep: Wide Track Full Size Cherokee: 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985 Jeep J10, J20: 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
