QU40866 1410 Series Tube Weld Yoke for 3" Diameter Driveshafts replaces broken or bent original equipment tube yokes. QU40866 Tube Yokes fit 3" x 0.083" driveshaft tubes. A very common part on Dodge, Ford, and Ram light and medium truck rear driveshafts using Spicer 1410 series universal joints from the 1950's to current. USA Made.
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: Product Note
Matching U-Joints Tech Help Applications
Tech Note 1: Product NoteMake sure the outside diameter of your driveshaft tube is 3". Measure the distance from the center of the weld to the center of the u-joint hole. If that dimension is approximately 2-1/8", then this is the part for your driveshaft if the wall tube wall thickness is 0.083".
Tech Note 2: Matching U-JointsQU40866 Tube Yoke takes external snap ring type universal joints made to Spicer 1410 series specifications. The u-joint cup diameter is 1-3/16". The overall u-joint width is 4-3/16". See TK40705 and QU40789 universal joints.
Tech Note 3: Tech HelpDriveshafts need to be retubed anytime the tubing gets bent or dented. Driveshaft assembly can be done by any competent machinest, but best results are usually obtained from dedicated driveshaft specialists who can both build and balance the finished shaft. For information on driveshaft runout and balance, see my TM3000 Driveshaft and Universal Joint Service Manual or TM3000 Excerpt TSB3510 Vibration, Balance, Angles, Ratings, Run Out, Torque Specs.
ApplicationsDodge:Diesel 250, 350: 1989, 1990, 1991, 1992, 1993Ram 2500, Ram 3500 with 3" Rear Driveshaft: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Other Applications universal by size
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
