QT1158 Differential Bearing Installer for all 2003-current AAM 10.5" Dodge Ram 2500 rear axles, all 1973-current AAM/GM 14 bolt, 10.5" ring gear rear axles, all Dana-Spicer Model 60 and 61 front or rear axles, plus all standard Model 70 axles that use Timken 387A Differential Bearings. QT1158 features a raised internal ring that contacts the bearing inner face so you can press or drive your diff bearings on without damaging the cage. 5/8" center hole accepts our QT1100 or QT1116 Driver Handles or any other driver with a 5/8" pilot. USA Made.
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Exploded View XV1001 1975-1989 Dodge W250, W350 Dana 60/61 Front AxleExploded View XV1006 1977-1991 Chevy & GMC Dana 60 Front Axle
Dan the Gear Man® Tech Notes: Model 70 Axles
Installation Force Applications
Tech Note 1: Model 70 Axles
Dana Spicer Model 70 axles were built to take either differential bearings with 3-13/16" diameter bearing cups or 4-1/8" cups. If you have a 70HD, you have the larger cups and you need QT1159 Bearing Installer. QT1158 fits most standard Model 70 rear axles in single rear wheel trucks built since the late 1970's which will usually have the 3-13/16" bearing cup as will Dodge dual rear wheel axles built from the mid 1980's to 2002. Almost all Model 70 front axles also use the 3-13/16" smaller bearing cup.
Tech Note 2: Installation Force Over the years, I have seen a lot of diff bearings installed with makeshift methods that failed prematurely. The soft cage and both the hardened rollers and races are easily damaged from rough handling. Bearings are kind of like eggs, they can take tremendous pressures in certain directions, but are easily wrecked by applying impact force in the wrong place. The big difference is a bearing that fails can cause an accident that injures or kills you, while crushing an egg just means you get some shell bits in your omelet! With the QT1158, your installation force is applied entirely to the inner race face, thereby preventing you from harming the cage, races, or rollers.
Applications: AAM 10.5" Rear Axle in 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Dodge Ram 2500
AAM/GM 10.5" 14 Bolt Rear Axle in 19731973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Chevy or GMC 3/4 ton and 1 ton trucks Dana Spicer Model 60 and 61 Front or Rear Axles Dana-Spicer Model 70 Axles with 387A Differential Bearings
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
