QK1114 NV4500 and NV5600 Manual Transmission Shift Tower Spacer and Bolt Kit includes the metal/rubber spacer that fits between your Shift Tower and the transmission top cover on 1998-2005 Dodge and 1995-2007 GM New Venture NV4500 5 speed manual transmissions. Also fits 1999-2005 Dodge New Venture NV5600 6 speed manual transmissions. Kit includes the spacer, 4 bolts, 4 bushings, and RTV sealant. Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project! Dan the Gear Man® Tech Notes: Installation Kit Contents Matching Parts NV4500 Tools Applications Tech Note 1: InstallationUse the RTV sealant to seal between the metal side of the Shift Tower Spacer Plate and the top of your transmission top cover (NV4500) or housing (NV5600). Do NOT apply any sealant to the rubber side of the Spacer! Install metal towards bottom and torque to 8 lb.ft. Tech Note 2: Kit ContentsThe Component Parts of QK1114 Manual Transmission Shift Tower Spacer Kit are: (4) QU10155 Spacer/Bushing (4) QU10156 Bolt QU10157 Metal/Rubber Tower Spacer Plate QU90005 RTV Sealant Tech Note 3: Matching PartsMatching Parts for QK1114 Manual Transmission Shift Tower Spacer Kit: QU10047 Shift Tower for 1998-2005 Dodge NV4500 5 Speed Manual Transmission QU10218 Shift Tower for 1994.5-2007 GM NV4500 5 Speed Manual Transmission with Low Rise Cover QU10703 Shift Tower for 1994.5-2007 GM Right Side Drive Vehicles with NV4500 Low Rise Top Cover QU12009 Shift Tower for 1999-2002 Dodge NV5600 6 Speed Manual Transmission QU12010 Shift Tower for 2003-2005 Dodge NV5600 6 Speed Manual Transmission Tech Note 4: NV4500 ToolsNeed Torque Specs or Rebuild procedures? Order my 116 page, full color illustrated TM1003 NV4500 Rebuild Manual. You will need some special tools to correctly service your NV4500 Transmission. The chart below lists our current NV4500 Special Tools for popular models.
TOOLS for SPECIFIC NV4500 MODELS
Component 23 SplineDodge 4x4NV4500LD 29 SplineDodge 4x4NV4500HD 30 SplineDodge 4x2NV4500LD 31 SplineDodge 4x2NV4500HD 32 SplineGM 4x4 35 SplineGM 4x2
Mainshaft Nut QT2002 QT2001QT2036 QT2002 QT2001QT2036 QT2002QT2028 1-1/2" HexSocket
Mainshaft Holding NLA QT2000 NLA QT2011 N/A N/A
5th Gear NutTorx® Cross Bolt N/A QT9205 N/A QT9205 N/A N/A
Output Seal Installer N/A QT1801 N/A QT2058CALL Not Used Not Used
Tailshaft Bushing Remover and Installer Not Used Not Used Not Used QT2044 Not Used Not Used
TOOLS For ALL NV4500 MODELS
CountershaftFront Bearing Cup Installer QT1802 Use with QT1101 or QT1119 Driver Handle. Also can use flat side to install Dodge 4x4 Rear Output Seal
Countershaft Front Bearing Installer QT2004 Can also use to press 3-4 Synchro Hub on original equipment mainshafts
Input Bearing & Countershaft Rear Bearing Installer QT2005 Can also use to install Input Seal
Input Bearing Cup Installer QT1801 Use with QT1100, QT1101, QT1116, or QT1119 Driver Handle.
Countershaft Support QT2006 Use to support front of countersahft when installing countershaft rear bearing
1-2 Synchronizer Support QT2008 Use to support 1-2 synchronizer hub during synchronizer assembly
10mm 1/2" Drive 12 Point Socket QT1020 USA Made Impact Socket for Factory Tailshaft Housing Bolts
Long Shank Punch for Shift Lug QT9300 3/16" x 8" Shank for 5th Gear Shift Lug Roll Pin
Tech Note 5: ApplicationsChevy and GMC: Silverado and Sierra Trucks with MT8/MW3 5 Speed NV4500 Manual Transmissions: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 Dodge: Ram 2500, Ram 3500 with NV4500 5 Speed: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106
