QU40744W CV Ball Replacement Kit with TSB3503 Tech Service Bulletin fits most mid 1980's to current domestic 4x4 front and rear driveshafts with Spicer-Type, non-greaseable and 2005-up Dodge Ram greaseable Double-Cardan Constant Velocity joints. This money-saving Kit allows you to reuse the cast iron CV centering yoke. Kit includes QU40744 CV Ball and socket with needle bearings, spring (under red shipping protector), and seal. USA Made. Also included with this kit is our 16 page Tech Service Bulletin TSB3503 Spicer Style External Snap Ring Constant Velocity Service with 63 color photos.
Only need the Kit without the Tech Service Bulletin? Order QU40744 Only need the the Tech Service Bulletin? Order TSB3503
Need More Info?
Use the handy Links below to access over 40 years of Dan's product and vehicle specific Tech Notes to easily get the information you need for your vehicle's repair, maintenance, or upgrade project!
Dan the Gear Man® Tech Notes: Puller Needed
Install Tool Matching Parts, General Matching Parts for 2005-2016 Ford Super Duty Matching Parts for 2003-2018 Dodge Ram Matching Parts-Saved for Future Use Matching Parts-Saved for Future Use Applications
Tech Note 1: Puller Needed If your CV Flange casting is OK, you can save money by replacing just the worn ball and seat with this Kit. Be advised you will need a 1"-1¼" blind hole bearing puller and a hydraulic press.
Tech Note 2: Install ToolInstalling this CV Kit can be challenging unless you have an install tool. A good, makeshift tool to press against the New Socket is your old, worn out socket without the ball.
Tech Note 3: Matching Parts, GeneralQU40704 CV Ball Dust SealQU40829 Replacement CV Ball Grease SealQU40803 1350 Series CV Flange Yoke for Dodge RamQU40131 1330 CV Flange Yoke for Dodge RamQU40805 135 Series Front CV Flange Yoke for FordQU40824 1350 Series Rear CV Flange Yoke for FordQU40835 Replacement CV Ball Tension SpringChevy & GMC Shop ManualsDodge & Ram Shop ManualsFord Shop ManualsJeep Shop Manuals
Tech Note 4: Matching Parts for 2005-2016 Ford Super DutyExploded View XV514 2005-2016 Ford Super Duty Front CV DriveshaftQU20103 Driveshaft BoltQU40805 Replacement CV Flange YokeQU40524 OE CV Flange YokeQU40829 CV Ball SealQU40835 CV Joint Tension SpringQU40800 CV Center YokeQU40704 CV Joint Ball SealQU40825 CV Ball Stud Tube Weld YokeQU40863 CV Joint Head AssemblyTK40981 Premium 2.75" x 0.083" DOM Driveshaft TubingQU20373U Used Splined Slip Yoke SocketQU50586 Boot ClampQU20138 Boot KitQU20372 Splined Slip Yoke ShaftQU40874 Replacement Slip StubQU40802 Screw-On Slip Yoke SealQU40875 Slip YokeQU40709 Strap and Bolt KitTK40719 Premium U-JointQU40731 Greaseable U-JointQU40873 EZ-Grease U-Joint
Tech Note 5: Matching Parts for 2003-2018 Dodge RamExploded View XV508 2003-2013 Ram 2500 and Ram 3500 Front CV DriveshaftExploded View XV509 2013-2018 Ram 2500 and Ram 3500 Front CV DriveshaftQU40131 1330 Series Front CV Flange Yoke AssemblyQU40803 1350 Series CV Flange Yoke AssemblyQU40953 1410 Series Double Cardan CV Head AssemblyQU40829 CV Ball SealQU40835 CV Joint Tension Spring
Tech Note 6: Matching PartsSaved for Future Use
Tech Note 7: Matching PartsSaved for Future Use
ApplicationsQU40744 is a Replacement part for the following 4x4 vehicles equipped with Spicer-Type original equipment front CV Driveshafts:
Chevy-GMCAll with Spicer Type Double-Cardan Front CV Shaft: 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977Dodge-RAMall Ram 1500, Ram 2500, Ram 3500 with Double-Cardan Front CV Shaft: 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013Dakota: 1987, 1998Ram 4500, Ram 5500: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Ram 2500, Ram 3500 with 1410 Series Front Driveshaft: 2013, 2014, 2015, 2016, 2017, 2018
Ford: Explorer: 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998
F-350: 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997 Super Duty*: 1998, 1999, 2000, 2001, 2002, 2003, 2004 Excursion*: 2000, 2001, 2002, 2003, 2004, 2005
All Super Duty: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
*Dan the Gear Man® Tech Note: Some Excursions and early Super Duty's also came with Saginaw type CV shafts which use a different type CV Ball KitJeepAll Jeeps with Double-Carden Spicer-Type CV shafts: 1995.5, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Dan the Gear Man® Tech Note: Some early 1995 Jeeps came equipped with a greaseable CV Ball. Use QU40743 for those applications and ALL Jeeps with greaseable CV shafts: 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994
Phone:
406-384-0270
Email:
sales@torqueking.com
Location:
7727 S Leopard Ave,
Billings
Montana
59106