Cheese Slicer Kit Large / Black Reviews

3.6 Rating 14 Reviews

About Woodcraft:

Woodcraft Supply, LLC is one of the nation's oldest and largest suppliers of quality woodworking tools and supplies. You'll find Woodcraft stores in more than 70 major metropolitan areas across the U.S.; and Woodcraft annually distributes 1.5 million catalogs featuring more than 10,000 items to all 50 states and 117 foreign countries. The Woodcraft catalog is a standard among woodworkers as the most complete offering of first rate products for woodworking available anywhere. Woodcraft also publishes six issues of Woodcraft Magazine annually.

Visit Product Page

Phone:

800-535-4486

Location:

1177 Rosemar Rd,
Parkersburg
West Virginia
26105

Visit Product Page

FL From FAIRFAX

Verified Reviewer

“I've made a couple dozen boards using these kits. The issue of getting the rounded wire end to engage with the rod is simple: I drill a 3/8" hole from the back, with my drill press set to just enter the saw cut, less than half way through the board, directly where the two interface. Then the loop drops right in and the rod slips through: easy. You can make a shallow plug to cover the hole, or just leave it open-for drainage. Form follows function.”

3 Helpful Report

Posted 2 years ago

GW From ROLLA

Verified Reviewer

“Bought the large kit and is absolute junk, from the metal for the handle not bent properly and too weak for job. The wire for slicing the cheese cannot be tightened enough without bending handle then it loosens right back up. Poor design and materials”

3 Helpful Report

Posted 2 years ago

“i bouth 2 and bouth wires broke befor finish wtf”

Helpful Report

Posted 3 years ago

MK From Reston

Verified Reviewer

“I made a number of these for holiday gifts, Everyone really likes them. I used my Dremel and a very small bit to enlarge the slot to make sliding the wire onto the handle a bit easier. Worked very well - no problems at all”

1 Helpful Report

Posted 3 years ago

WE From ROARING SPRING

Verified Reviewer

“This is a very simple project, but the cutter frame on all 3 kits I received were 5/8" out of square over5". I had to heat one bend with a torch to square them up -and they must be square for the wire to ride in the saw kerf. Inexcusable really.”

1 Helpful Report

Posted 3 years ago

DF From Huntsville

Verified Reviewer

“I craft cheese slicers all the time using this exact kit. The kit works great as long as I've cut and drilled properly. When I've done my part it takes 30 seconds to finish.”

Helpful Report

Posted 3 years ago

JG From Willis

Verified Reviewer

“Purchased 4 of these for gifts. The plastic handle detracts from a nice end grain board. The wire (cutter) broke before I had the opportunity to struggle with the final assembly. I figured it was my heavy hand, the problem, the replacement wire (which I'd planned on including 1 extra with each gift ) can only be purchased as a 4 pk. - 2 small 2 lg wires for 7 bucks - I've got no use for the small wires since I purchased the lg. cutters Bottom line I'll be returning the 3 un-opened cutters and looking for alternative gift ideas”

2 Helpful Report

Posted 3 years ago

TK From Oviedo

Verified Reviewer

“Just built a cheese slicer using the Cheese Slicer Kit, came out great! One note: I tapered the end of the shaft that goes into the hole on my bench grinder which made it easier to slip the wire loop onto. Will be making more for gifts.”

1 Helpful Report

Posted 3 years ago