Please note if purchasing 1 x 3 metre trim, the trim will arrive as 2 x 1.5 metre sections. This is to prevent damage in transit. Dark grey, non-adhesive finish to simulate the appearance of lead. Do not topcoat. Fitting Instructions The C trim is usually fitted into a bed joint of the brickwork or a 35/50mm (depending on the trim type) deep chase cut out with an angle grinder fitted with a mortar chase disc. Apply polyurethane adhesive to the back of the C trim every 300mm. Fit the trim into the slot and press firmly back to the wall to overlap the D trim. Apply a clear silicone sealant along the length of the trim into the slot to seal the trim in. A. Whilst we would recommend GRP Trims with a fibreglass roof (the fibreglass will bond better). If you decide to use lead or metal trims, ensure the lead or metal is clean and free from contaminates. Use G4 sealer when overlapping with the fibreglass.
About FibreGlassDirect:
FibreGlassDirect is an online shop which supplies quality, fibreglass raw materials to the UK and Ireland. We are based in Leeds, West Yorkshire and our Head Office is in Newry, Northern Ireland.
We have been online since 2009 but have over 60 years of experience as part of the Tricel Group.
We offer an extensive range of resins, topcoats, gelcoats and ancillaries for a wide range of industries. Some of our key supplies are used for Fibreglass Flat Roofing, Fibreglass Ponds, Boat Repairs and Castings for Decorative Items.
Phone:
+44 (0) 28 4175 3738
Email:
sales@fibreglassdirect.co.uk
Location:
Milltown Industrial Estate, Unit 4, Greenan Road
Warrenpoint
BT34 3FN
