L-Adapters for TSProf K03 and Kadet Reviews

4.3 Rating 11 Reviews

Questions

Visit Product Page

Phone:

4702277960

Email:

km@gritomatic.com

Location:

242 N Dixie Avenue
Cartersville
30120

Visit Product Page

Erik Kliebert

Verified Reviewer

“Perfect addition to my K03. Great machining. Perfect fit and finish. Highly recommend.”

Helpful Report

Posted 2 years ago

Stephen Till

Verified Reviewer

“Purchased for TSPROF Kadet Pro - These L-Adapters are well-made and will work as intended. However, they did not work out of the box. The hardware and threading inside the adapter are not the same as the Thumb Screws which come with the TSPROF. The TSPROF Thumb Screws M5x18 and the thread size included with the L-Adapters appears to be smaller. To use the L-Adapters you must (1.) have additional M5 screws on hand to mount the TSPROF Clamps to the L-Adapters and then use the provided screws to mount the L-adapters to the frame, or, (2.) re-thread the L-adapters to fit the TSPROF Thumb Screws and have additional M5 screws to mount the clamps to the L-adapters. L-Adapters are well made, they fit the frame and provide more versatility than other single clamp after-market adapters but to use them you must be prepared to modify or have additional M5 screws on hand.”

1 Helpful Report

Posted 2 years ago

Manny Morales

Verified Reviewer

“Very tight tolerance.very satisfied.Easy to install.”

Helpful Report

Posted 2 years ago

Keith Lawrence

Verified Reviewer

“Perfect fit and finish. You have to remove the center cap on the KO3 to use the narrowest position. It pops off very easily and is just there for aesthetics. These adapters do precisely what they were designed to do. Now I can work smaller blades such as my Benchmade Bugout with it perfectly centered. And it also gives you more width of course. Highly recommend. GET THEM!”

Helpful Report

Posted 2 years ago

Robert Gomez

Verified Reviewer

“Does not work with the stock screws with the ko3.”

Helpful Report

Posted 2 years ago

Drew Sheffield

Verified Reviewer

“The threads were very tight and the TSProf thumb screw didn’t want to thread in. Fortunately I had a tap and chased the threads and now it is fine. Also the middle thumb screw cover has to be removed to get the clamps all the way to the center but it’s no big deal.”

1 Helpful Report

Posted 2 years ago

“works great!! thanks for returning my package gritomatic! i got this one and it fits the tsprof pro perfect. exactly what i was looking for.”