Login
Start Free Trial Are you a business? Click Here

Mauser 98 LR (3-Hole) Picatinny Rail 0 MOA (Military) Reviews

5 Rating 37 Reviews
Read EGW Guns Reviews


EGW Mauser 98 Large Ring 3-Hole Picatinny Rail 0 MOA - Military
Quick Check: Confirm Your Military Mauser Before Ordering Action Type: Large Ring Military Mauser 98Receiver Style: Stripper Clip HumpMounting Pattern: 3-HoleRail Type: One Piece PicatinnyMOA: 0 MOACenter Spread: 4.275"Material: Domestic 6061 T6 Extruded AluminumFinish: Matte Black Type II AnodizedOverall Length: 6.670"Height: .4" (Top of Receiver to Top of Picatinny)Weight: 2 oz.Quick Disconnect Ring Compatible: NoAmbidextrous: YesTorque Specs: 20 in/lbsMounting Hardware: #6-48 X 1/4" Screws and T-10 Bit IncludedSKU: 47020GTIN: 841370106837
MILITARY 3-HOLE MAUSER APPLICATION
This rail is designed for compatible Large Ring Military Mauser 98 actions with the stripper clip hump and the appropriate 3-hole mounting pattern. It is not the same mounting pattern as our commercial Large Ring Mauser rails. Verify your receiver configuration and the published 4.275" center spread before ordering.
Product Overview
The EGW Mauser 98 Large Ring Military 3-Hole Picatinny Rail provides a modern one-piece optics mounting platform for compatible military Mauser 98 actions.
This version is specifically designed around the military Mauser receiver with the stripper clip hump and uses the 3-hole mounting configuration associated with this rail.
The rail is machined from domestic 6061 T6 extruded aluminum and features a full-length Picatinny mounting surface for flexible scope-ring placement. This 0 MOA version uses a published 4.275" center spread.
Military Mauser rifles have been manufactured and modified in many configurations over the years, so receiver identification and actual hole-spacing measurements should both be used when determining compatibility.
Technical Specifications
SKU: 47020
Action: Large Ring Military Mauser 98
Receiver Style: Stripper Clip Hump
Mounting Pattern: 3-Hole
Rail Type: One Piece Picatinny
Mount Series: Standard
MOA: 0 MOA
Center Spread: 4.275"
Machined From: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Type II Anodized
Overall Length: 6.670"
Height: .4" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Ambidextrous: Yes
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4" Screws and T-10 Bit Included
GTIN: 841370106837
Military vs. Commercial Mauser 98 Actions
This rail is designed for the military Large Ring Mauser 98 configuration, not the commercial Large Ring mounting pattern used by rifles such as many Interarms, Zastava, Parker Hale, and similar commercial actions.
One of the key identifying features for this rail is the stripper clip hump found on the military-style receiver.
Do not select a Mauser rail based only on the words "Mauser 98" or "Large Ring." The military and commercial configurations can use different mounting patterns.
THIS VERSION IS FOR THE MILITARY RECEIVER
Look for the stripper clip hump, confirm that your receiver uses the appropriate 3-hole mounting pattern, and verify the published 4.275" center spread.
Large Ring or Small Ring Mauser?
Military versus commercial is not the only distinction to consider. You should also verify whether your Mauser uses a Large Ring or Small Ring action.
Use the image below as a visual reference. For more detailed information about Large Ring vs. Small Ring receivers, military and commercial actions, measurements, and common Mauser variations, read our complete Mauser identification guide.
Small Ring vs. Large Ring Mauser Action Comparison
Not Sure Which Mauser Action You Have?
Mauser actions were manufactured in many countries and configurations. Our identification guide explains how to distinguish Large Ring and Small Ring actions and discusses the differences between common military and commercial Mauser receivers.
Read Our Large Ring vs. Small Ring Mauser Guide
LARGE RING ALONE DOES NOT CONFIRM FITMENT
This rail requires the correct combination of Large Ring receiver, military stripper-clip-hump configuration, and 3-hole mounting pattern. Identifying the rifle as a Large Ring Mauser alone does not guarantee compatibility.
4.275" Center Spread
This rail uses a published 4.275" center spread.
We strongly recommend measuring the mounting-hole spacing in your receiver before ordering. Military surplus rifles may have been drilled or modified previously, so the model or action family alone should not be used to confirm compatibility.
MEASURE BEFORE ORDERING
Confirm that your receiver has the correct military 3-hole configuration and matches the published 4.275" center spread. Do not assume fitment solely because the rifle is a military Mauser 98.
This Rail Does Not Fit the Mauser 3000 L
This Mauser 98 scope rail does not fit the Mauser 3000 L.
If you are unsure which Mauser receiver you have, compare your receiver to the identification information above and verify the mounting-hole dimensions before ordering.
One-Piece Picatinny Rail
Picatinny cross slots run the full length of the rail, giving you flexibility when positioning scope rings and establishing proper eye relief.
The center channel reduces overall mass while maintaining a continuous one-piece mounting platform across the receiver.
In many applications, the center channel may also allow continued use of the rifle's factory iron sights.
Domestic 6061 T6 Aluminum
We machine this rail from domestic 6061 T6 extruded aluminum in our shop.
After machining, the rail is tumbled, sandblasted, and Type II anodized with a matte black finish for long-lasting durability.
0 MOA Configuration
This version has 0 MOA of built-in elevation and is intended for applications where additional elevation from the rail is not required.
0 MOA VS. 20 MOA
0 MOA: Recommended for shooting approximately 0-500 yards.
20 MOA: Recommended for shooting approximately 500-1000 yards where additional scope elevation may be beneficial.
Installation
Before installation, confirm that your rifle has the correct Large Ring Military Mauser receiver, stripper clip hump, 3-hole mounting pattern, and 4.275" center spread.
We recommend tightening the mounting screws to 20 in-lbs and applying a small amount of blue threadlocker.
#6-48 X 1/4" mounting screws and a T-10 bit are included.
Minor fitment may be required due to manufacturing tolerances and the wide variety of Mauser receivers and previously modified military rifles.
VERIFY FITMENT BEFORE INSTALLATION
Do not force the rail or mounting screws onto a receiver that does not match the published dimensions. Military Mauser rifles may have been altered, drilled, or modified during their service life or afterward. If you are unsure of your receiver configuration or mounting pattern, have the rifle inspected by a qualified gunsmith.
Frequently Asked Questions
What Mauser does this rail fit?This rail is designed for compatible Large Ring Military Mauser 98 actions with the stripper clip hump and appropriate 3-hole mounting pattern.
What is the stripper clip hump?It is the raised receiver feature associated with the military Mauser configuration this rail is designed around. It is one of the important differences between this military rail and our commercial Large Ring Mauser rails.
Is this the commercial Mauser 98 rail?No. This is the military 3-hole Large Ring version. The commercial Large Ring Mauser rails use a different configuration.
What is the center spread?The published center spread is 4.275".
Does every military Mauser 98 fit this rail?No. Mauser rifles have been manufactured and modified in many configurations. Confirm the Large Ring receiver, stripper clip hump, 3-hole pattern, and published mounting dimensions before ordering.
Will this fit a Mauser 3000 L?No. This rail does not fit the Mauser 3000 L.
Is this a Large Ring or Small Ring rail?This rail is for the Large Ring Military Mauser 98 configuration.
How can I identify whether I have a Large Ring or Small Ring Mauser?Use the comparison image above and read our Large Ring vs. Small Ring Mauser Actions guide for additional identification information.
Is this the 0 MOA version?Yes. This particular rail has 0 MOA of built-in elevation.
What material is it made from?The rail is machined from domestic 6061 T6 extruded aluminum.
What torque should I use?We recommend 20 in-lbs on the mounting screws with a small amount of blue threadlocker.
A Picatinny Rail Designed for the Military Large Ring Mauser 98
For compatible military Large Ring Mauser 98 actions with the stripper clip hump and 3-hole mounting configuration, this 0 MOA rail provides a lightweight, one-piece Picatinny mounting platform for modern optics.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.

Visit Product Page

Location:

1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951

“The rail fits perfectly. A great investment.”
Helpful Report
Posted 3 years ago
“This rail fits most all Mauser 98 military. So nice to have the dimensions listed on the website. This one is nice for receivers that have not been drilled. For drilled receivers check your dimensions, you might need to use the undrilled rail to match previously drilled receivers.”
Helpful Report
Posted 3 years ago
“It fits the contour of my Chiang Kai Shek rifle (very similar to Mauser 98k) perfectly. So far, the scope mount stayed secured on it after recoil.”
Helpful Report
Posted 3 years ago
“Fit perfect will order agin!!”
Helpful Report
Posted 3 years ago
“Great quality and detail machining. Aluminum is easy to modify if firearm is already drilled and tapped or if the contours do not line up on the rear of the action near the bolt handle slot.”
Helpful Report
Posted 3 years ago
“Fit perfect! Looks good.”
Helpful Report
Posted 4 years ago
“The action ring for the Mauser is too large for the rail at the rear of the action”
Helpful Report
Posted 4 years ago
“My old Leupold one-piece base for my sporterized M98 big ring Mauser had to be replaced because the rear scope ring screw stripped out and destroyed the threads. Unfortunately, the new Leupold base I ordered DID NOT fit; Leupold has changed the design shape from the old one, which would have required me to do some grinding to make it work. Thank goodness for EGW!!! Your scope base fit my sporterized M98 big ring Mauser exactly!!! No grinding required!!!”
1 Helpful Report
Posted 4 years ago