Vortex Viper / Venom Red Dot Sight Mount for Walther PPQ 22 (fits Burris FastFire, Docter, Viridian RFX25) Reviews

3.9 Rating 17 Reviews

HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT This mount fits:
Walther PPQ M2 .22LR (PPQ 22)
This mount does not fit:
Walther PPQ M2 (pistol calibers other than 22lr) Walther PPQ Q4 Tac (already optics ready) Walther Q5 Match (already optics ready) Walther P22 (we don't make any mounts that fit this)
Any Walther model that comes with the standard sights that have the detent will work with this mount. This mount now comes with a set screw allowing it to be used with the friction fit dovetails as well. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 Button Head Screws(2) 6-32 Flat Head Screws(1) 6-32 Set Screw Red Dot Fitment:
Viridian RFX25 Vortex Viper Vortex Venom Burris FastFire Burris FastFire 2 Burris FastFire 3 Burris FastFire 4 Docter ADE RD3-001 ADE RD3-002 ADE RD3-009 UTG Reflex Micro Dot Crimson Trace CTS-1200 Crimson Trace CTS-1300 Sightmark Mini Shot Cuda RX-795
The EGW red dot sight mount adapter plates for the Walther PPQ 22 are meant to be installed in place of the rear sight. Remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper, Vortex Venom, Burris FastFire, or Docter red-dot sight. Mounting hardware is included. Our adapter plate is meant to be installed from the left to the right with the muzzle facing forward. The dovetail has a progressive taper to allow for easier install. Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.Click here to see a video from Vortex on how to install our red dot base on a slide. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“Mounted a vortex viper on my PPQ M2 .22 Mount fits very tight but instructions were very helpful as it’s a slightly tapered fit and is only designed to go in one way. I know I’ve read a few reviews about how hard this was to install and a few people even said it required some filing on the slide?! But I thought it was super easy. Like pressing any new sight in would be. You can see in my pictures that the mount is clear of the slide so no modifications were necessary. The mount and Optic hold zero so I’m very happy about having the option to install a red dot on this pistol that doesn’t have an optics ready option. Great product! Highly recommended!!! I’ll probably buy another for my XDS that also has no optic version”

Helpful Report

Posted 3 months ago

“The mount is deliberately too tight to fit into the slide. Patience and some diamond files, 150 minutes later, and I had it squeezed in, ready for a lifetime of trouble free operation.”

Helpful Report

Posted 1 year ago

“Very difficult to install”

Helpful Report

Posted 1 year ago

“Well made. Fast shipping. Good price had to slightly adjust for fit. All in all great will be buying from EGW again.”

Helpful Report

Posted 1 year ago

“UPDATE: I spoke with Al at EGW. He explained what needed to be done and why. I had to "adjust" the mount using a diamond stone and a diamond file. Although this is not "ideal" I did eventually get it to fit. Red dot mounted and I am very pleased with the end result. Not sure I will ever be able to remove it, but it is mounted, solid and works! Original Review: Does not fit. On the first customer service call, I was asked to measure everything with a micrometer which I did. Called back and left a message and never got a return call. Called today and was told it is VERY NORMAL for it not to fit because of the tight tolerance and that all I need to do is buy a diamond file and file it down until it fits! I really expected it to fit as they said it was made FOR THIS GUN! Unless you have gun smith tools, this is probably not the mount to purchase!”

Helpful Report

Posted 2 years ago

Thanks for the review! We are sorry to hear that you are not pleased with how the mount fit (or didnt fit) your firearm. We try our best to make these mounts fit guns without additional fitting and filing but since we do not manufacture the slides it is very difficult to match the tolerances perfectly on every gun. We recommend our parts be installed by a gunsmith due to this, but many customers have been able to take on the job at home. We understand how this can be frustrating.. If you are not happy with the mount we are not going to stick you with it, please reach out to our customer support and you can send it back for a refund.

Posted 2 years ago

“The mount does not fit w/o a gun smith. it will not even fit into the dove tail this is not for the PPQ M 22 LR.”

Helpful Report

Posted 2 years ago

We are sorry to hear that you ran into an issue with our mount. While we do recommend having a qualified gunsmith install our mounts, it should fit your gun. Due to manufacturing differences minor fitting may be required. There is a part number that is machined on top of the mount, please compare that to the part number that you ordered. We want to make sure you were not sent the incorrect mount.

Posted 2 years ago

“You guys are great and make quality products. Fit and finish is 100%!”

Helpful Report

Posted 2 years ago

“The mount is as advertised however I had to remove a very minute amount of material in order to install the mount in the dovetail once done it started fine but was very tight on the slide but the function is perfect once fitted.”

Helpful Report

Posted 2 years ago