EGW Red Dot Sight Mount for Walther PPQ 22 (fits Burris FastFire, Docter, Viridian RFX25) Reviews

3.8 Rating 24 Reviews

HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTER FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
Walther PPQ 22 Red Dot Mount | Fits Vortex Venom, Viper, Burris FastFire & Docter
Quick Check: Rear sight replacement optic mount for the Walther PPQ M2 .22LR. Fits: Walther PPQ M2 .22LRFootprint: Docter / Vortex / Burris FastFireMaterial: 7075 AluminumImportant: Does NOT fit centerfire PPQ models or optics-ready Walther pistols
The EGW red dot sight mount for the Walther PPQ M2 .22LR installs in place of the factory rear sight and provides a low-profile mounting solution for optics using the Docter / Vortex / Burris FastFire footprint.
This mount allows you to install optics like the Vortex Venom (Open Emitter), Vortex Viper, Burris FastFire, Viridian RFX25, and other compatible micro red dots without permanent slide modification.
The mount installs from left to right with the muzzle facing forward. The dovetail uses a progressive taper for easier installation and secure fitment.
Learn more about optic footprints: RMR vs Docter vs RMSc Footprints Guide
Technical Specifications
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Torque Specs: 15 in/lbs
Made in USA
Compatible Pistols
Walther PPQ M2 .22LR (PPQ 22)
Does NOT Fit
Walther PPQ M2 centerfire models
Walther PPQ Q4 Tac
Walther Q5 Match
Walther P22
Any Walther model that comes with the standard sights that use the detent setup may work with this mount. This mount now includes a set screw allowing it to be used with friction-fit dovetails as well.
Compatible Red Dots
Viridian RFX25
Vortex Viper
Vortex Venom (Open Emitter)
Burris FastFire 1
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
Mounting Hardware Included
(2) 6-32 x 5/16 Button Head Screws
(2) 6-32 x 3/8 Flat Head Cap Screws
(1) 6-32 x 3/16 Cup Point Set Screw
Installation Notes
Remove the factory rear sight
Install the EGW mount into the dovetail from left to right with the muzzle facing forward
Tighten set screw if applicable
Place the optic onto the EGW mount
Apply blue Loctite to the optic mounting screws
Torque optic mounting screws to 15 in/lbs
Why Choose This Walther PPQ 22 Red Dot Mount?
No permanent slide modification required
Low-profile rear sight replacement design
Compatible with popular Docter footprint optics
Precision machined from durable 7075 aluminum
Lightweight and rugged for training or range use
Proudly made in the USA by EGW
Important Fitment Information
This mount is specifically designed for the Walther PPQ M2 .22LR and does not fit centerfire PPQ models, Walther Q5 Match, or optics-ready Walther pistols.
Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Click here to see a video from Vortex on how to install our red dot base on a slide.
Warning: This product may contain trace amounts of lead. For more information, visit www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“Only if mechanically inclined and have 60° small key files and make it fit for yourself it's usable”

Helpful Report

Posted 2 weeks ago

“It required fitting, which I expected. The plate would not have fit tight or correctly had it not required being fit to my actual firearm. Very good optics plate. Thanks EGW”

Helpful Report

Posted 4 weeks ago

“It took me while to find this mount, but happy with the quality and has a perfect fit, although I had to file a bit.”

Helpful Report

Posted 2 months ago

“While this looks like a quality piece the angles don’t match the dovetails on my Walther PPQ 22. I had to file it to fit but then it didn’t hold firmly. Because of the miss matched angles.”

Helpful Report

Posted 4 months ago

“Tight fit, installed on Walther PPQ 22lr by a very skilled gunsmith in Tampa. He had a bit of a struggle due to tight fit, and concerns about damaging Aluminum frame, but was able to get nearly centered, close enough for 22lr plinker. Mounted Burris Fastfire 3, fit like a glove, rock solid. Must use mounting screws provided with base, NOT mounting screws provided from Burris.”

Helpful Report

Posted 4 months ago

“The staff was very quick in answering my questions and sent me an email with a link for the right mount. This mount was very easy to install.”

Helpful Report

Posted 5 months ago

“I will start off by stating that I have not had a chance to reach out to EGW about this issue, just writing an honest "this is what I received" review. I ordered this for my son's 14yo birthday, so you might understand that I didn't want to dissapoint him by not presenting him with the new red dot on his Walther PPQ M2 22LR pistol. I know some tight tolerances are needed to ensure a good fitment, but the dovetail mount was too large on the mount and trying to initially force it into place was a mistake. Not wanting to dissapoint and with no time left for an attempted exchange, I started filing the mount down in an effort to get it to fit. I ended up having to file both the mount and the slide of the gun before it would slide in, which I think was a mistake on my part. I shouldn't have done that, but desperate times call for....... The mount now fits but when the set screw is torqued down there is a very notable misalignment with the slide, meaning torquing the set screw pushes the mount up in the back and down in the front, so it's clearly not parallel with the bore of the gun. We have not had a chance to sight it in yet and I am hoping that the elevation adjustments will compensate for the misalignment.”

Helpful Report

Posted 8 months ago

“Mounted a vortex viper on my PPQ M2 .22 Mount fits very tight but instructions were very helpful as it’s a slightly tapered fit and is only designed to go in one way. I know I’ve read a few reviews about how hard this was to install and a few people even said it required some filing on the slide?! But I thought it was super easy. Like pressing any new sight in would be. You can see in my pictures that the mount is clear of the slide so no modifications were necessary. The mount and Optic hold zero so I’m very happy about having the option to install a red dot on this pistol that doesn’t have an optics ready option. Great product! Highly recommended!!! I’ll probably buy another for my XDS that also has no optic version”

Helpful Report

Posted 1 year ago