“Had a few minor workmanship issues: 1) One of the elevator screws was not long enough to secure the rotating shaft so inserted small copper grommet to make contact and secure the shaft; 2) the flap control horns were in the servo's center position at 0% flap input. Had to physically remove each servo, rotate the control horn toward the wing trailing edge to make the flaps flush at 0% input, then reinstall each servo. Be careful on first few landings - keep thrust during runway alignment and approach - I almost stalled and lost her on maiden because I tried gliding on approach like I do with my 64mm F16. Otherwise fantastic flying jet, definitely worth the money!”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“Motion RC Service and FreeWing F22s are the best. I have had the FreeWing F22 90mm and now have the FW F22 70 mm. They both set the bar high for quality and performance. I’ve had lots of turbine jets and EDF jets. The F 22 is now my only go to jet. As others have voiced it is the easiest and most forgiving airframe out there! Set up correctly the F22 does it all, fast or slow! Have Been in the air since 1962 Private pilot and RC models. Know what I’m saying is fact. You can not go wrong with Motion RC and FreeWing Aircraft. Thank you Motion RC!”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“Puis je utiliser cet article avec le jet f22 raptor 70mm .Voici l'article : Freewing Tail Flame Afterburner LED Lights for Select 80/90mm Freewing EDF JetsThanks Thierry”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“video I recorded of todays flight https://youtu.be/FFqQgR2fZrQ?si=xe1aRG7V62lh-rImMy club member did the trim and maiden for me today I wasn't feeling to hot but they flew and it was great sounding they said it handle great I ran with a SMC 4400mah 6s 80c they got 4min 40sec flight time with 3.87-3.89 per cell. and they put a smc 3400mah 6s 80c and got 3mins 30sec with 3.88-3.89 on each cell can't wait for my turn at it”
