How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“love this thing! It was very easy to build and set up, flying it with a spektrum 8360 allows full functions and the ability to put the nose wheel on its own channel to set a custom speed, travel and adjustment separate of the rudders. it flys great and handled easily. Have flown on some windy days and it handles it great! Easy to land unlike some other 90mm jets.”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“I now have two of these jets, one running in the stock power system, one custom painted and powered by the 90mm 8s power system. Highly recommended this jet, super easy to fly and glides surprisingly well. A must have for your hanger!”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“It flies very well with this setting for me:CG = 100mmUbec = 6VTailerons, mixed with flaps 40%AS3XGain slow: R=29, P=37, Y=44Gain fast: R=19, P=24, Y=29Stop lock: R=50, P=35, Y=35Nose wheel: gain=29, heading=29The other seeting is default.Check EDF mounting plywood pieces. They vere not glued at my model.”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“It flies very well with this setting:CG = 100mmUbec = 6VTailerons, mixed to flaps 40%AS3X setting:Gain fast speed: R=19, P=24, Y=29Gain slow speed: R=29, P=37, Y=44Stop lock: R=50, P=35, Y=35Nose wheel gyro: gain=29, heading=29Other parameters are default.Check EDF mounting plywood - it was not glued at my model.”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“Almost an awesome model. Great looking and flying airplane, it performs really well and very much like the real Hornet. Problem is the flap servo’s are too weak for this design. It needs minimum 13g servo’s for the flaps. 3 different models of this plane had flap servo issues and Motion RC more or less told me to piss off.”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“20 seconds after takeoff of the 1st flight the airplane starts to roll to the right if i pulled at the elevator. After further 20 seconds i could not compensate this rolling and suddenly the F-18 experienced an ancontrollable stall followed by a severe impact. Investigation of the possible cause showed, that the left hand plastic linkage of the elevator was broken because the plastic was to weak. Total time of flight with this new modell less than 1 minute. 3 witnesses observed the flight and helped to investigate the crash.The wooden attachment for the impeller unit wasn´t clued in properly and i had to fix it before the first runup!”
