The Zoeller 98-0001 Flow-Mate M98 represents precision-engineered dewatering technology built around a 1/2 horsepower permanent split capacitor motor operating at 115 volts. This submersible pump delivers 72 gallons per minute at maximum flow, pushing effluent through a 23-foot maximum head with its engineered thermoplastic vortex impeller design. Weighing 38 pounds with dimensions of 12-1/16 inches height by 10-1/8 inches width, the MPN 98-0001 unit excels in septic effluent applications, low-pressure pipe systems, and enhanced flow STEP installations where sewage solids passage without clogging determines operational success. The 115-volt single-phase configuration draws 9.4 amperes during operation, eliminating the need for specialized electrical infrastructure in residential basement installations. This specific voltage requirement makes the 98-0001 ideal for standard household circuits, while its hermetically sealed motor construction prevents groundwater infiltration that commonly destroys lesser submersible units. The automatic float switch activates at 9.5-inch water levels and deactivates at 3 inches, providing precise flood control in sump basins ranging from 18 to 24 inches in diameter. Cast Iron Class 25-30 Construction & Reinforced Component Engineering The 98-0001's complete cast iron housing assembly—encompassing the switch case, motor housing, pump base, and impeller chamber—achieves 25,000-pound tensile strength specifications. Unlike composite-bodied competitors that crack under thermal cycling, this Model M98's monolithic iron construction withstands continuous submersion in corrosive effluent environments. The powder-coated epoxy finish applied to all cast surfaces provides chemical resistance against acidic sewage breakdown products and alkaline groundwater minerals that typically cause premature pump failure in basement and elevator pit applications. Every fastener, float guard, lifting handle, and switch arm consists of marine-grade stainless steel, eliminating rust contamination in flood-prone environments. The neoprene square ring seal between motor and pump housing maintains watertight integrity under 23 feet of water pressure, while carbon-ceramic mechanical shaft seals prevent effluent from entering the oil-filled motor chamber. This multi-barrier sealing approach in the 98-0001 extends operational lifespan beyond 15 years in continuous-duty sewage applications where inferior designs fail within 36 months. Vortex Impeller Technology for Solids-Laden Effluent Handling The MPN 98-0001 incorporates a non-clogging vortex impeller manufactured from engineered thermoplastic, creating a recessed pumping chamber that generates hydraulic forces without direct contact between the impeller and solids. This critical design feature allows the Model M98 to pass spherical solids up to 3/4-inch diameter without jamming—essential performance in septic effluent containing tissue fragments, hygiene products, and organic matter. Traditional semi-open impeller designs clog repeatedly with fibrous materials; the 98-0001's smooth vortex surface keeps sewage moving through the 1-1/2-inch NPT discharge without maintenance interventions. The vortex impeller rotates at 1,725 RPM, generating centrifugal force that accelerates effluent outward while creating a low-pressure zone that draws water and solids into the pumping chamber. At 10-foot head pressure—typical for basement to grade-level discharge—the 98-0001 maintains 3,660 gallons per hour flow rate, sufficient for residential sewage systems serving 4-bedroom households. The engineered plastic impeller resists corrosion from acidic wastewater and caustic cleaning chemicals that degrade metal impellers in competitor pumps. Vertical Float Switch Operation
Visit Product Page
