Name: Inline Tube
Address: 15066 Technology Drive, ,, Shelby Township
Rating: 4.58

“The parts are normally what you order and normally perfect fit have order several times. But what truly gets me is when you return the part they charged you a re-stocking fee which is totally ridiculous and bogus. I will have to think long and hard before reordering again from here because of that reason. It’s not guaranteed to fit and if it don’t fit you would return the product and to charge a restock fee is getting it $$ at all angles”

Helpful Report

(Shelby Twp) - Posted 8 months ago

“Some of the lines were not bent the same and had to modify them”

Helpful Report

(Shelby Twp) - Posted 8 months ago

“The problem area for this line to fit my 1968 Dart was the bend turning up into the rear wheel well. The bend needed to start a little sooner because the straight section before the rear turn is slightly too long which means you can’t get the clip that holds the line in place into its factory hole. It’s next to impossible to bend that stainless steel line to change that situation but I got the bends to move a little bit and then used a board wedged from the ground to the fuel line.Then I used a hammer to force the board to shove the line up high enough so the clip holding the line in the factory place would snap in. I almost had to send the line back it was that hard. Once in place it look pretty good except where the line goes from one side of the frame down and around to the other side of the frame in the wheel well area. The main thing is the leaks from the previous line are gone and this line is operating well and looks good.”

Helpful Report

(Shelby Twp) - Posted 8 months ago

“My package with the distribution block and hold air valve, the distribution block looked like it sat in water, you will see when you receive these parts in the mail.”

Helpful Report

Posted 9 months ago

Dear Paul, Thank you for your feedback and for letting us know about your experience with the distribution block. We sincerely apologize for the condition in which you received the parts. Your comments about the quality are valuable to us, and we will address this issue to ensure it doesn’t happen in the future. If you have any further questions or concerns, please don’t hesitate to reach out. We appreciate your support! Best regards, The Inline Tube Team

Posted 5 months ago

“Well.... it's the correct one. Not impressed by how it was bent to put in a smaller box. I've bought many fuel and brake lines online and have never had one show up that way. Stop bending metal tubes and start charging for shipping costs to put them in a proper size box or wrap them.”

Helpful Report

Posted 10 months ago

“Not a 9 piece kit as advertised, ordered and was not aware of this. No partial refund or anything. Nice quality for what i did get, but wouldnt order again.”

Helpful Report

Posted 10 months ago

Thank you so much for taking the time to provide us with your valuable feedback about your recent experience with Inline Tube. We genuinely appreciate your support and thoughts. We are thrilled to hear that you had a positive experience overall and found the ordering process to be fast and user-friendly. Ensuring our customers have a seamless, hassle-free experience is one of our top priorities, so we're delighted to know we're on the right track. We also appreciate your kind words regarding the excellent quality of our products. We take great pride in offering high-quality items that not only meet but exceed our customers' expectations. Furthermore, we understand that occasional issues may arise, and we apologize for any inconvenience you experienced with the shipping process. We continuously strive to improve our services, and your feedback will greatly assist us in addressing any areas that need attention. If there's anything else we can assist you with or if you require any help in the future, please don't hesitate to reach out to our dedicated customer service team. We are here to support you and ensure your complete satisfaction. Thank you once again for your thoughtful review, and we greatly appreciate your business. We look forward to serving you again in the future!

Posted 10 months ago

“Got the lines in a timely manner, got them down to my shop to find out they were not bent right, but with a tube bender and a little finness I was able to make them work. The picture of the ones I ordered are bent at a 90 degrees and the ones I got were bent at 180 degrees.”

Helpful Report

Posted 10 months ago

Dear John,Thank you so much for your wonderful feedback about Inline Tube! We greatly appreciate your kind words and taking the time to share your experience with us. We are thrilled to hear that our products have met your expectations. I do apologize for the need to have to rebend the lines. Customer satisfaction is our top priority, and we are delighted to know that we are doing a good job in making our customers happy. If you ever need any further assistance or have any questions, please don't hesitate to reach out to us. We are here to help in any way we can. Once again, thank you for your feedback and support. We truly value customers like you! Warmest regards, [Your Name]

Posted 10 months ago

“Fit was decent”

Helpful Report

Posted 11 months ago

Dear Stephen, Thank you so much for taking the time to provide us with your valuable feedback on our Inline Tube. We truly appreciate your kind words and your support for our brand. We are thrilled to hear that you found our customer service to be exceptional. We have always prided ourselves on going the extra mile to ensure our customers' satisfaction. Your acknowledgement of our efforts reassures us that we are on the right track. If you ever have any further questions or need any assistance, please do not hesitate to reach out to us. Our dedicated team is always here to help make your experience with Inline Tube as seamless as possible. Thank you once again for your encouraging feedback. We look forward to serving you again soon! Warm regards, [Jareth]

Posted 11 months ago

“no call back when needed”

Helpful Report

Posted 11 months ago

Dear Mike, Thank you so much for taking the time to provide feedback on your experience with Inline Tube. We truly appreciate it! We are thrilled to hear that you had a positive experience with us. Our team works diligently to ensure that every customer is happy and satisfied with their purchase. It's great to know that our efforts are making a difference. We do apologize for you not receiving a call cack. If there is anything you need please reach out to our support team. If there is anything else we can assist you with or if you have any further questions, please don't hesitate to reach out. Our friendly customer support team is here to help you in any way we can. Again, thank you for your wonderful feedback. We value your business and look forward to serving you in the future!

Posted 11 months ago

“The brake line that goes from right front is incorrect. The tube goes under the frame. The one you sent me goes under the frame but the inside of the “U” is only 1 1/2” wide. Frame is over 2”. Having to rebend what you sent me to try and make it work.”

Helpful Report

Posted 11 months ago

Dear Randall, Thank you so much for taking the time to provide us with your feedback about Inline Tube. We truly appreciate it, and we are thrilled to hear that you had a positive experience with us. At Inline Tube, customer satisfaction is our top priority, and it's wonderful to know that we are doing things right to make our customers happy. We strive to provide exceptional products and excellent customer service at all times. If there is anything else we can assist you with or if you need any further help, please do not hesitate to reach out to us. We are here to ensure your continued satisfaction. Thanks again for your support and for choosing Inline Tube. Warm regards, [Jareth]

Posted 11 months ago

“Great purchase”

Helpful Report

Posted 1 year ago

Dear Jose, Thank you so much for taking the time to share your feedback about your experience with Inline Tube. We truly appreciate it! We are thrilled to hear that our efforts to make our customers happy are paying off. Providing a seamless and satisfactory experience is our top priority, and we are glad to know that we have succeeded in doing so for you. If there is ever anything else we can assist you with or any questions you may have, please do not hesitate to reach out to us. We are here to help and ensure your satisfaction. Once again, thank you for your kind words. We look forward to serving you again in the near future! Warm regards, [Jareth]

Posted 11 months ago

“The proportioning valve did not not fit my 84 Z28 wth 4 wheel disc. My Camaro has bulb flares and the proportioning valve has inverted flares. The brake lines got from Inline tube hard bulb flares ??? I returned the valve for credit”

Helpful Report

Posted 1 year ago

Hi Douglas, Thank you so much for taking the time to leave us a review of Inline Tube. We really appreciate your feedback and are thrilled to hear that you had a positive experience with us. Our team works hard to ensure that our customers are happy and satisfied with our products and services. It's great to know that our efforts are paying off! We strive to provide top-notch quality, fast shipping, and excellent customer service every step of the way. If you ever need any further assistance or have any questions, please don't hesitate to reach out to us. We're always here to help! Thanks again for choosing Inline Tube, and we hope to serve you again in the future. Warm regards, [Jareth]

Posted 11 months ago

“Unfortunately the pipes did not fit the application. Han ing had 8 69 Camaros I know what the pipes should look like. I cut up the pipes to make them work. But it is not the stock look”

Helpful Report

Posted 1 year ago

Dear Robert, Thank you so much for taking the time to share your feedback about Inline Tube! We truly appreciate it. We are thrilled to hear that you had a positive experience with us. At Inline Tube, customer satisfaction is our top priority, and we're glad to see that our efforts in making customers happy are paying off. Your kind words about our product quality and prompt delivery mean a lot to us! We want you to know that our team is always here to assist you, whether you need any further assistance or have any questions. Please don't hesitate to reach out to us if there's anything we can do to help. Once again, we really appreciate your feedback and for choosing Inline Tube. We look forward to serving you again in the future! Warm regards, [Jareth]

Posted 11 months ago

“Relax, I haven't installed them yet. They look great!”

Helpful Report

Posted 1 year ago

Hi Jerry, Thank you so much for taking the time to provide us with your feedback on Inline Tube! We truly appreciate it. We're thrilled to hear that you found our customer service exceptional and that you were pleased with the quality of our products. Our team works hard to ensure that our customers are happy and satisfied, so it's wonderful to receive positive feedback like yours. If you ever need any assistance or have any further questions, please don't hesitate to reach out to us. We're always here to help! Thanks again for choosing Inline Tube, Jerry! Warm regards, [Jareth]

Posted 1 year ago

“Honestly, they are not exact fits. Needed about an hour of reworking various parts of the tube to get it to fit. The length is fine the (without a filter added) but the shape is off.”

Helpful Report

Posted 1 year ago

Dear JOHN, Thank you so much for taking the time to provide us with your valuable feedback on Inline Tube. We greatly appreciate hearing from our customers and learning about their experiences. We are thrilled to hear that you had such a positive experience with us. Our team works hard to ensure that our customers are satisfied with their purchases, so it's always encouraging to receive such kind words. We take pride in delivering high-quality products and providing excellent customer service. If you ever have any questions or need further assistance, please don't hesitate to reach out. We are more than happy to help in any way we can. Your satisfaction is our top priority! Once again, thank you for choosing Inline Tube. We truly value your support and look forward to serving you again in the future. Best regards, [Jareth]

Posted 11 months ago

“Not a happy customer. I bought the ss lines which didn't match my truck. I purchased this bracket thinking it would help and it doesn't. Money not well spent on my parts.”

Helpful Report

Posted 1 year ago

Thank you so much, Chris, for taking the time to provide us with your feedback on Inline Tube! We always strive to maintain a high level of quality in our products and services to ensure our customers' happiness. If you ever need any assistance or have any questions in the future, please don't hesitate to reach out to us. Our friendly team is here to help and would be more than happy to assist you. Thanks again for your valuable feedback, Chris! We genuinely appreciate your support and hope to serve you again in the future.

Posted 11 months ago

“Thankfully there were 4 in the package. 3 broke immediately. Not the strongest quality. They do work great if you cover them with epoxy and let it harden.”

Helpful Report

Posted 1 year ago

Thank you so much for taking the time to review Inline Tube. We greatly appreciate your feedback. Would you be willing to contact our customer support team with the order information to allow us to attempt to identify if there was a manufacturing issue with the item you ordered? The support team can be reached by email at support@inlinetube.com If there is anything more we can do to assist you or if you have any further questions, please don't hesitate to reach out to our friendly customer support team. We are here to help and ensure your satisfaction. Once again, thank you for choosing Inline Tube. We look forward to serving you again in the future.

Posted 10 months ago

“Well this order is not going so well, I received 2 line nuts for 3/16 and a 2 for 1/4 line, I ordered 4 - 3/8-24 for 3/16 line. I sent a request to fix to customer service and was told it would be fixed and I’ve received nothing yet.”

Helpful Report

Posted 1 year ago

“Had to bend them to fit into factory clamps on my rear axle. Was surprised how easily they bent, thought stainless tubing would have bent harder or even kinked. Justin W.”

Helpful Report

Posted 1 year ago

Hi Justin, Thank you so much for taking the time to leave us feedback about your experience with Inline Tube! We truly appreciate it. We're delighted to hear that you found our customer service team helpful and knowledgeable. We take great pride in ensuring that our staff is well-trained to provide excellent service to our valued customers like yourself. We understand the importance of meeting our customers' needs promptly, and we're glad that we were able to assist you efficiently. If you ever have any further questions or need any help in the future, please don't hesitate to reach out to us. We're always here to assist you. Thank you again for your kind words, Justin! We look forward to serving you again soon. Best regards, [Jareth]

Posted 11 months ago

“Well I had to order two cuz the first one, When I tightened it down shattered. Inferior product. Need to find a different manufacturer.”

Helpful Report

Posted 1 year ago

Dear George, Thank you so much for taking the time to provide your feedback on Inline Tube. We truly appreciate your kind words and are thrilled to hear that our products have met your expectations. If there is anything else we can assist you with or if you have any further questions, please don't hesitate to reach out. Our team is always here to help and ensure your experience with Inline Tube remains exceptional. Thank you again for your support, and we look forward to serving you in the future.

Posted 10 months ago

Shipping & Delivery
Delivery Methods	Postal Service, Courier
Average Delivery Time	Within 5 Days
On-time Delivery	Greater than 93%
Accurate And Undamaged Orders	98%
Customer Service
Communication Channels	Telephone, Email, Live Chat
Queries Resolved In	Under An Hour
Customer Service	4.7 out of 5
Returns & Refunds
Returns Process	Could Be Better

Inline Tube Reviews