“Perfect solution for a sink with a low drain relative to the ‚Äúrough‚Äù. Specially molded j trap has adequate insertion depth to be mounted ‚Äúbackwards‚Äù without concern. The fact that this solution is only $7 makes it even better. Wall thickness of tubes is fine.”
“We began a kitchen remodel. We had old cabinets out and new floor installed. Began to put new kitchen in and got to the sink. We found that the pipe was too high for us to attach our sink as sinks now are deeper. We thought we were going to have to either get a different sink (which would have been bad as our granite was ordered with this sink measurement) or replace pipes throughout our lower floor which is totally finished. We researched and researched and found someone who said to use a reversible J bend for this issue. We bought this and used it. WE WERE SO HAPPY! It worked and is still working great. Drains very well. I can't tell you how much this helped.”
“This P-Trap solved my problem - when I installed a deeper sink my garbage disposal sat lower than before. Since the outlet was now slighly above the level of the drain, a normal p-trap would not work. My local sources did not have this option, but plumbingsupplyandmore came to the rescue again!I ordered it and was pleased to find it provided a perfect watertight fit. The true blue washers are far superior to the usual plastic washers found in this type of plumbing, so I am confident that these fitting will hold up over time.One word of advice - as others have mentioned, the sleeve on the lower side of the p-trap is not very long, so your downpipe must be trimmed perfectly straight. If the downpipe is cut at an angle (like my original one - thanks to my builder!), it will probably leak and you must replace it. I did have to purchase a replacement outlet pipe for my garbage disposal, but with the right length and a straight cut everything worked great.Highly recommended!”
