“I bought the coping bull nose tool and variable speed grinder with 50- 3000 pad. We are excited to see the results of the polishing on the coping we set. The tools showed up in a timely manner and were packaged neatly. We also appreciate the help from the customer service dept as they guided us to the tools we were asking about.”
“Tool bit worked great. No chipping of brick on the exterior wall. So much better than a mansonry drill bit which almost always chips the brick when it exits the exterior wall. I drilled thru 8in block with exterior brick. Diamonds look like they are intact. I talked with a electrician about drilling the hole, his quote was $350.00-400.00 for a 1 3/4 dia. hole, no way, your company saved me a lot of money, by having a drill bit for the DIY. Thank you!”
“Very happy with my order. Time table was accurate and very reasonable, product is as it should be. Quality seems to be there although this is my first blade so I have no comparisons but it works at least as good as i had expected and this is far from the more expensive blades that are available. If i wanted a faster better blade I would expect to pay much more, even though i doubt the quality would improve enough to make it worth it. Overall very good purchase.”
“This is the third cord bit I've bought from you guys the last one was a 2.5" I've used very little the other one was a 3.5" and after going through my foundation twice it's down to 1 tooth, so that's why I bought this 4" bit, the only problem I've had is trying to keep my drill from submerging from the excess water, before I was standing in my shop drilling out so I had plenty of drainage, this time I'm in the drainage ditch drilling as close to the bottom as possible, I don't have enough space for my pump to work the drill eats all that up, I guess I'll have to wait untill I finish trenching so I'll have more space in the hole are pull my kitchen cabinet so I can but it at an angle from up top, anyways you guys make a great affordable product, thanks, Rick”
“Diamond bit hole cutter came quickly. Wish the pilot hole bit on the hole cutter was diamond encrusted as well as it took a long time to get the pilot hole into the stone but then the diamond hole cutter went through like butter once I got the pilot hole deep enough.”
“Purchased the 2" diamond bullnose grinder wheel and it was exactly what I needed to complete my project. It quickly cut through the travertine cap stones with ease. Excellent product!”
“I haven’t had a chance yet, just other things I’m working on but I will let you guys know as soon as I get the time to start my next project. The service has been great Thanks”
“I am a pretty serious DIY person, but don't have a ton of experience with diamond tools. I needed to bore a 24" hold through a granite boulder.
I purchased the EDiamond tools higher-end 1.5" boring bit, 12" extension, adapter and water adapter. Worked like a charm, and can see no discernible wear on the diamond blade. Follow the RPM recommendations on their website and don't put a lot of pressure on. Let the blade do the work. My big HD drills were too slow RPM-wise, so I ended up using a cordless Ridgid drill on high speed. Went through three batteries but it worked great. There is no pilot so you need to either use some form of Guide to get it started without the bit walking. Or do what I did. I started with a regular Home-Depot 1.5" tile hole saw so there was an 1/8" deep circle for the Big EDiamond bit to get started.”
