“I never do this. But what the hell! The tool worked great at shaving off the edge of the tile! That is the important part. But the black rubber brace left black marks on some of the tiles. I could get it off but it was a struggle! Otherwise I am real happy with the result.”
“Recieved the bit and mandrel unfortunately did not fit any of my 3 hammer drills , delivery was quick , don't know if I didn't look at order correctly .
Have already bought from you would still recommend”
“have not used blade yet , but for time on receiveing blade was good and hope we can work together going forward , i am a tile instructor at our facility & purchase tools that are needed and when there are sales on tools!”
“This is my first boring drill bit, used to drill in river rocks to make candle holders.
I've drilled into 8 rocks about .75 inches at this point and it still cuts reasonably fast but I've noticed the arbor bit is getting dull so I use a different bit for my pilot hole.”
“the 2" CORE Worked like a charm after some light sanding of the outer surface finish on the arbor. It wouldn't fit and lock into my sds plus rotary hammer drill. I looks like the coating they are using adds just about 10 thou too big for the chuck. Talked with someone from EDiamond tools and they were very grateful for the feed back.”
“The purchase took months to complete but when finished it provide four star service. The completion of the job could not have been better.
Sincerely Yours , Kevin L. Nixon”
“A remarkable product! My project is 125 sqft of counter top and sink area, i will have only gone through 1 800 grit 1 1500 grit and about 3/4 of the 3000 grit. for the price it is making my budget easier to meet and much easier then using up my elbow grease haha. I would love to have the option of a higher grit though. as the 3000 doesn't quite polish it smooth enough to reflect the same mirror like sheen as you would see granite and such stone materials. thanks again Ediamond! love both the price and performance!”
“THE 1&1/4 DIAMOND HOLE CUTTER FOR BATHROOM TILE WORKED GREAT. I HAVE CUT EIGHT HOLES AND IT IS STILL GOING THROUGH THE TILE LIKE BUTTER. I WOULD RECOMMEND THIS PRODUCT. JP KENNEDY”
“I used the "extended core bit for stone and concrete" to drill a 1 3/4" hole through a 1/2" marble tile backsplash (over top of a buried faucet valve stem). The first few minutes of drilling was the fastest but the bit held up for two holes, which is what I needed. I used a pre-drilled piece of plywood as my drill guide and the bit was very stable. It took about an hour per hole with a 2000rpm hand drill with lots of breaks to clear the hole and rinse the bit.”
