“I have two EDiamond dry core drills -- a 1.5 and a 2", with arbor and pilot drill. They are both excellent products, and if you need to drill a largish hole through cinder blocks or concrete there is simply no viable alternative than a core drill for the competent home handyman. These two did the job which I needed done just fine. Recommended. Also, good customer service follow up after I contacted them with a question.”
“Turned out I didn't need the core bit I ordered I sent it back to them and got a quick refund. The part looked to be a good quality item I will be ordering from them in the future”
“Needed to trench out some concrete cracks to seal properly and this “Crack Chaser” diamond cutter worked fast and clean. Wish I had had it years ago !!!”
“I purchased a 1- 1/8" drill that I used with a standard 3/8" electric drill. It is a bit of a challenge to start the hole if not using a guide drill. I was lucky and the first material I was drilling through was stone. It had an irregular surface so I could rest the drill against a protrusion on the stone and start the hole. Behind the stone was cement board, fire brick and then solid concrete. I drilled two 18" holes, I also purchased an extension from your firm, and didn't have any trouble. I stopped every once in awhile and pulled back on the drill to cool it and also remove some of the waste material. About half way through I removed the drill, dipped it in a bucket of water, attached the extension and proceeded. I ended up drilling an extra hole and then sealed it up just in case I need another one in the future. I have never needed one of these in 40 years of construction and don't think I will again but it worked fine. My suggestion is to perhaps start a rental program for extensions and other accessories, for guys who will only use it once. Or sent up a program to return the items purchased for a 10 or 20 percent credit. Maybe include drills, if there is a way you can determine how much "life" remains to the drill.”
“I needed a set of aggressive diamond grinding wheels for an rush job. Ordered them on Friday late in the afternoon and was assured they would arrive by noon Saturday, the next day, and they did. the discs were aggressive and helped me shave about 6 hours off the job.”
“Best tool for installation of 6" stove vent for kitchen remodel. Went through brick in no time at all. Excellent tool when used with pilot bit and right drill.”
“I’m in the tile installation industry, I have bought my 7” grinding cup wheels from EDiamond tools for a few years now. I have always been pleased with their service and shipping quality. Thanks EDiamond tools.”
“The site is easy to get through. They carry many tools you can't get down the street. The shipping is sent out immediately. So far the products I've used are good value for the money”
